XCON 10 Sound Solutions Audio 10" 1750W XCON Series Subwoofer

Roll over to magnify and click to enlarge
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6

Product Reviews

Write Review

  1. Kappa

    Posted by Parker on 17th Nov 2016

    Beautiful finish, beautiful surround and cap.
    The spiders are solid and quality. Coil looks like it could run a welder! Everything about this driver is top notch - they come stiff and ready for life so with that in mind be easy on her for the first couple of weeks. Nevertheless you'll notice it's muscle immediately. SSA is your go to.

  2. Rock Solid

    Posted by Scott on 31st Oct 2016

    This little guy is a beast, the weight is pretty insane for a 10". I have two of these and even though they arent in the ideal enclosure with ideal power, they still sound great with only a few days break in. I dont think Ive even seen more than ~10mm of cone travel yet! I have a substantial amount of sound deadening to do before I can fully appreciate these beauties. I've had and heard a lot of setups die out in the upper mid sub range (45-65hz) and these stay nice and flat, very happy with the purchase!

  3. A 10 that acts like a 12

    Posted by Evilmonstertruk on 3rd Mar 2016

    Running this as a single 10 in the trunk of my accord and it sounds as good and loud as my JL 13w6v2. Very happy with this. I hope it lasts for years to come.

  4. xcon 10 D2

    Posted by KENNY on 29th Jul 2015

    bought this sub from all the reviews ive read and seen on youtube.had a custom dual aero ported box built to 1.6 cubes @ 37 htz in my king cab frontier loading off of passenger door and man let me tell does this thing sound awesome with lots of output.a 12 in my truck would have been way over kill.LOVE this xcon.well worth the wait and would buy again and again.THANKS SSA !!

  5. loud and clean on a boat-Axis a22

    Posted by Unknown on 27th Apr 2014

    I have one 10" in the drivers footwell in a small atrend ported box, and it hits hard as hell in open air I have a 1200 watt amp going to it and I have it turned down quite a bit so it doesn't shake my boat apart, and overpower my 4 polk mm651s run off 120rms each. The bass sounds good too, not just annoyingly loud.

  6. impressed

    Posted by Doug W. on 20th Apr 2014

    built a custom box 1.754 cu. ported & tuned @ 33.99 Hz running on 1500 RMS clean no clipping. well the brochure is not a joke when it claims to hit like a sledgehammer and the 10" SSA Xcon delivers! gave me a headache after about 25 min. clean crisp and tight, quality is far beyond any sub I've ever owned. have had several big name brands, JL, JBL, Infinity, Kicker, Mtx, and Sundown. Do yourself a favor if you want a very good mix of S.Q. and bass then buy the Xcon set it up and you'll be most likely be happy, I know that I am


    Posted by Steve L. on 28th May 2012

    i was looking for a new pair of 10" subs for my lexus is250, i previously sold my 2 orion hcca 10's. i wanted something as good as before and if not better. i came accross the ssa website and saw the 10" xcons. i have never heard of this brand before, but decided to buy them anyway because they were hand crafted in the usa. after waiting for the build time and shipping they finally arrived. i installed them in my custom ported enclosure and cranked it up! WOW, I WAS AMAZED OF THE SOUND QUALITY AND THE LOWS THEY PRODUCED. I am so impressed that i will now carrry the line in my shop.

XCON 10 Sound Solutions Audio 10" 1750W XCON Series Subwoofer
55.00 LBS
Calculated at checkout
Estimated build time of 21+ business days.

Out of Stock

Product Description

Introducing the XCON, the new pinnacle of sound and output.  With a brutally strong single slug motor that has a monstrously bumped back plate, the XCON really sets itself apart from the pack right away.  We started with the ideals behind the ICON and went to the ultimate degree with the XCON.  With an eye popping 31mm of excursion, the XCON uses a 3" roun.6d, 2.6" long, 4 layer Aluminum voice coil, that strong enough handle some serious levels of power, yet is light enough to still be very accurate and precise.  To keep the inductance in check, the XCON employs an Aluminum shorting ring.  For those high power installs, the XCON runs 5 spiders in total: triple 8" progressive spiders, dual NOMEX spiders and triple flat sandwiched lead wires to handle all the abuse.

For seriously high output installs and sound quality competitors alike, the XCON is at the top of the food chain.  With output that has been described as being hit by a sledgehammer and pin point accuracy, the XCON has all the bases covered.   You can be proud of your purchase, because the XCON is designed and hand crafted in the U.S.A.  The purpose of the XCON is not to match or just beat out the competition, but to make sure there never was competition to start with.  There is only one choice in the super sub woofer market and you are looking at it.


Coil(s) 3", 4 layer,Aluminum coils
Terminals Push terminals
Cone Pulp Fiber Cone
Suspension 5 progressive spiders
Shorting Ring Aluminum
Motor FEA optimized motor
Former 3" Anodized alum. former
Lead Wires Triple Sandwiched Leads
Hand Crafted in USA
Re 3.7
Fs 33.2 Hz
Qms 4.87
Qes .37
Qts .35
Mms 202.5 g
Vas 15.27 l
310 cm^2
Bl 20.65
Spl 83.7 1W/1m
Xmax 29mm
Wattage 1750wRMS
Displacement 0.15 cuft

Enclosure Recommendations

10" XCON D1/D2 12" XCON D1/D2 15" XCON D1/D2 18" XCON D1/D2
Sealed .75-1.00ft^3 .9-1.25ft^3 2.0-2.25^3 4.25-4.75ft^3
Sealed Optimal 1.0-1.25ft^3 1.35-1.5ft^3 2.75-3ft^3 5.0-5.5ft^3
Ported 1.25-1.50ft^3 @ 27-34hz 1.75-2.25ft^3 @ 27-34hz 3.0-3.25ft^3 @ 27-34hz 6.0-6.5ft^3 @ 27-34hz
Ported Optimal 1.5-1.75ft^3 @ 27-34hz 2.5-2.75ft^3 @ 27-34hz 4.0ft^3 @ 27-34hz 7.25-7.75ft^3 @ 27-34hz
Sub Outside Diameter 11.000" 12.500" 15.625" 18.500"
Cut Inside Diameter 9.250" 11.150" 14.125" 16.750"
Mounting depth 6.500" 7.250" 8.500" 10.000"

Pre-Designed Enclosures

For full size drawings and a Google SketchUp version of these enclosures please feel free to click the "DOWNLOAD ZIP FILE " link below. This is just another great resource offered by Sound Solutions Audio Inc. for our dedicated SSA customers!

To view the google sketchup file will require the installation of the software. This is available here: Google SketchUp

10" XCON D1/D2 12" XCON D1/D2 15" XCON D1/D2 18" XCON D1/D2
10" OPTIMAL PORTED 1.35 ft^3
12" OPTIMAL PORTED 2.65 ft^3
15" OPTIMAL PORTED 4.0 ft^3
18" OPTIMAL PORTED 7.65 ft^3
10" OPTIMAL SEALED .9 ft^3
12" OPTIMAL SEALED 1.45 ft^3
15" OPTIMAL SEALED 2.95 ft^3
18" OPTIMAL SEALED 5.25 ft^3
10" SMALL PORTED 1.1 ft^3
12" SMALL PORTED 2.0 ft^3

15" SMALL PORTED 3.2 ft^3

18" SMALL PORTED 6.35 ft^3
10" SMALL SEALED .7 ft^3
12" SMALL SEALED 1.15 ft^3
15" SMALL SEALED 2.15 ft^3
18" SMALL SEALED 4.5 ft^3
10" DUAL PORTED 2.63ft^3