Current Top Sellers
Introducing the XCON, the new pinnacle of sound and output. With a brutally strong single slug motor that has a monstrously bumped back plate, the XCON really sets itself apart from the pack right away. We started with the ideals behind the ICON and went to the ultimate degree with the XCON. With an eye popping 31mm of excursion, the XCON uses a 3" round, 2.6" long, 4 layer Aluminum voice coil, that strong enough handle some serious levels of power, yet is light enough to still be very accurate and precise. To keep the inductance in check, the XCON employs an Aluminum shorting ring. For those high power installs, the XCON runs 5 spiders in total: triple 8" progressive spiders, dual NOMEX spiders and triple flat sandwiched lead wires to handle all the abuse.
For seriously high output installs and sound quality competitors alike, the XCON is at the top of the food chain. With output that has been described as being hit by a sledgehammer and pin point accuracy, the XCON has all the bases covered. You can be proud of your purchase, because the XCON is designed and hand crafted in the U.S.A. The purpose of the XCON is not to match or just beat out the competition, but to make sure there never was competition to start with. There is only one choice in the super sub woofer market and you are looking at it.
- 3" wide, 4 layer, Aluminum coils
- Built in Cooling option
- Push terminals
- Pulp Fiber Cone
- 5 progressive spiders
- Custom FEA optimized motor
- Aluminum Shorting Ring
- 3" Anodized alum. former
- Triple Sandwiched Leads
- Hand crafted in USA
- 1750 rms
- Sealed: .9 - 1.25 cu.ft.
- Sealed: 1.35 - 1.5 cu.ft. optimal
- Ported: 1.75 - 2.25 cu.ft. @ 26-33hz
- Ported: 2.5 - 2.75 cu.ft. @ 26-33hz opt.
- Sub Outside Dia.: 12.500”
- Cut Inside Dia.: 11.150”
- Displacement: 0.17 cu.ft.
- Re: 3.7
- Fs: 32.4
- Qms: 5.24
- Qes: .39
- Qts: .37
- Mms: 222g
- Vas: 35 L
- Sd: 480
- BL: 20.65
- BL: 86.7 1w/1m
- Xmax: 31mm
XCON + T1500bd
Posted by Steve on 14th Dec 2014
These XCON subs are incredible. I have one XCON 12 under the seat of a 2012 Sierra Denali, and it sounds amazing. I lifted the seat 3 inches, nothing too crazy, and can still use it, and put the XCON in a 2.6 cube box tuned to about 32 hz. The clarity and low end of this sub is a fantastic mix. The subwoofer screams quality, and the added bonus of being built in the USA seals it for me. SSA FOR LIFE!
Posted by emily heidenreich on 5th Feb 2014
I havent hooked it up but i will be running the crescendo 2000 with it im building a box with 12ply birch cand stand mdo mdf junk. All daddos here. Really satisfied so far. Only thing i need is a free large black silver sticker and some smaller red ones wen i order the cresendo and a battery from SSA thanks
Best subwoofer ive ever owned
Posted by BavarianBeast on 16th Oct 2013
I have run this subwoofer , in alot of configurations it always impressed me ive ran it with 300w rms and ive ran it with 2500w rms and I can honestly say the sub dose well with low rms but it dosen't come alive until you use past 1000w rms. Ive ran sealed and ported tuned to 30 hz. if you want excellent sound quality and run in a sealed if you want just loud bass that still sounds good run ported.... I prefer sealed cause the sub can hit from 25hz to 80hz no problem but when I was running ported I was having trouble getting it to play anything higher then 50hz...
all in all you can not go wrong with this subwoofer. I dont think ill ever sell it.
JL WHO? XCON's are simply AMAZING!
Posted by MikeC on 27th Mar 2013
Purchased 2 Xcon 12's for my '06 Tahoe after having my JL w7's stolen. Running these on a Rockford 2500bdcp and they absolutely slam. Hit every frequency and have amazing response. Very tight and can move some serious air. If you get these, be ready for some flexin.
Box specs is 5 cubes @ 33 hz.
Posted by jhnsn73 on 18th Mar 2013
I had the Icon 12, and decided to go with the Xcon. Im glad I did, the output and quality of this sub is top notch, there is nothing wrong with the Icon but the Xcon is more my taste, it is brutal!!! Im running it off of 1 Zed Minotaur 2, @ 2 ohms. Its made in the USA also!!
Posted by Bryan on 6th Jul 2012
After researching around on the net I came across SSA and the xcon line. I ended up purchasing the 12" due to constraints on space and not going with the 15". I designed a box up tuned to 32hz and 2.65 cubes. The sub slams with the sundown 1500. The sub sounds very good and can get very loud. This will definitely be my go to brand for subs and if my friends ever want a sub SSA is what I will recommend.
Good job SSA team!
CLEAN AND LOUD
Posted by N/A on 6th Jul 2012
By far the cleanest and loudest 12" I've ever heard. It takes a while to loosen up the suspension but once it gets loose definately worth the wait.
Better than my 2 12" Rockford P2's
Posted by Mike on 5th Jul 2012
In my old car I had 2 12" Rockford Fosgate P2's running to an RF t10001bd amp and they hit pretty damn hard.
Since ordering the 12" ported Khaotik enclosure I was sad to find out I did not have enough trunk space for 2 12" again and had to settle for 1 and boy did I chose the right one.. This thing has half the surface area of the 2 12" P2's and hits 4x as hard this little thing is great (but of course there is the obvious difference in power 400w per each p2 compared to the 1750 of the xcon).
I have it powered with a Sundown SAX-1200D which is not up to par with what this sub can handle but it still beats down hard!! Can't wait to upgrade and see how much more it can handle.
I'd most definitely recommend this subwoofer to anyone who's looking for a good 12" to throw alot of power at.
Posted by Tyler Bhirdo on 5th Jul 2012
This sub is clean and accurate. It plays lows well works great in the box that I have it in. I am running it off of a Rockford Fosgate T1500-1bdcp and the amp is tuned to my deck with an SMD DD-1. The sub seems to get very hot and quickly. Bottoming out is also a problem. Hopefully it will be better when broken in. I have a fully upgraded electrical system and a yellow top less than 2 feet from the amp. This sub over all is a good product and will make system compleet.
Return Policy | Non Custom Built Items
ORDERS LESS THEN $750: You may return new, unopened items (non custom-built-items under $750) sold by SoundSolutionsAudio.com within 30 days of delivery for a full refund. Items should be returned in their original product packaging. We'll also pay the return shipping costs if the return is a result of our error, otherwise customers are responsible for return shipping costs. Just email us, and we will guide you through the process and even supply you with a return mailing label you can print out.
ORDERS MORE THEN $750: You may return new, unopened items (non custom-built-items over $750), there will be a 10% restocking fee. Customers are responsible for return shipping costs as well.
You should expect to receive your refund within four weeks of giving your package to the return shipper; however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days). We'll notify you via e-mail of your refund once we've received and processed the returned item.
Return Policy | Custom Built Items
If your custom-built-item has not yet begun to be manufactured you will be charged a 5% processing fee for refunding your payment. If your speaker has begun to be manufactured, or is finished, but has not shipped, you will be charged a 30% refund fee. If item has already shipped, you will be charged the 30% refund fee plus all applicable return shipping costs.
Any order over $99 USD is eligible for free shipping and applies to the U.S. 48 continental** states ONLY! Any other territory such as Puerto Rico, HI, AK, etc will have an additional shipping charge. If the shopping cart does not calculate it, don't worry we will contact you with additional shipping amount that is required. At that point, it is up to you to decide if you would like to continue with your purchase or get a refund. It's that simple!
If for any reason you have a question and would like to contact us, please don't hesitate. We are here to make your purchase a positive experience with our company.
**If you do NOT see your area pictured, your area falls under the "additional shippng required" zone
If your item has "Fixed Shipping Cost" listed next to it....
Fixed Shipping Cost only applies to the U.S. 48 continental** states only! If you purchase an item (without seeing the disclaimer) and are outside of the fixed shipping zone, don't worry! We will contact you with additional shipping amount that is required. At that point, it is up to you to decide if you would like to continue with your purchase or get a refund. It's that simple!
If for any reason you have a question and would like to contact us, please don't hesitate. We are here to make your purchase a positive e-commerce experience.
We would like to thank all our customers for their continued support and business. We really do appreciate it!