Air space without divider = 2.4 cubic ft entire box
Airspace with divider = 1.2 cubic ft per chamber
Mounting depth = 10 inches
Speaker terminals included
MDF wood
Charcoal carpet
This box also fits the following cars:
Chrysler 300 = 2005 to 2013
Dodge Charger = 2006 to 2013
Hole cutouts:
Standard hole cutout diameter for 8s = 7 inches
Standard hole cutout diameter for 10s = 9 1/8
Standard hole cutout diameter for 12s = 11 1/8
If you don't know the actual hole cutout diameter, choose the standard cutout below.
If we don't have your actual diameter listed below, choose the standard cutout, then provide us with your sub model #. No worries, we can look up the specs of your subs.
2007-2014 CHEVY SILVERADO CREW AND GMC SIERRA CREW CAB TRUCKS (NEW BODY STYLE) Note: This is for crew cab, not extended cab. *WILL NOT FIT THE 2014 1500 1/2 TON CREW* Fits HD and non-HD Fits dual 8,...
FEATURES: Fits dual 8, 10, and 12 inch subwoofers Air space = 2.4 cubic ft entire box without divider or Airspace with divider = 1.2 cubic ft per chamber Mounting depth = 10 inches Speaker terminals...
Fits 2008 to 2014 Dodge Avenger Features: fits dual 8, dual 10 and dual 12 subwoofers Mounting depth = 7.5 inches Air space = .9 cu ft per chamber two speaker terminals Charcoal carpet Hole...
2000 to 2005 Dodge Neon Dual Subwoofer Box Enclosure FEATURES: Fits dual 8 and 10 inch subwoofers Air space = .65 per sub Mounting depth = 8 inches Speaker terminals included Charcoal Carpet MDF...
Fits dual 8s, 10s and 12s Fits in trunk Air space = 1.2 cubic ft per chamber Mounting depth = 9 inches MDF wood charcoal carpet speaker terminals (your choice of placing the terminals on sides or...
The I Series Subwoofers from Incriminator Audio were designed with the entry level consumer in mind. Rated at a very conservative 500 watts RMS, the large voice coil and magnet structure of this line...
As newer cars and trucks with less and less space are being designed and released, a demand for a smaller subwoofers with high output is needed to supply the demand for "Bass in a small space"...
With the revival and relocation of Adire Audio to California we decided that it is time to do something that has not been done before with XBL^2 motor technology. We decided that it was time for a 4”...
With the revival and relocation of Adire Audio to California we decided that it is time to do something that has not been done before with XBL^2 motor technology. We decided that it was time for a 4”...