400-amp Machined Billet alternator for select Audi / VW applications
400-amp Machined Billet alternator for select Audi / VW applications
400-amp Machined Billet alternator for select Audi / VW applications
400-amp Machined Billet alternator for select Audi / VW applications
400-amp Machined Billet alternator for select Audi / VW applications

400-amp Machined Billet alternator for select Audi / VW applications

MechmanCustom Built: Estimated lead time of 5-15 Business days.
SKU: B11723400M
Categories : (Brand) Mechman
In Stock
Regular price$699.00

The time has come!  Our brand new 100% custom billet alternator for the Audi and VW customers is here.  No longer do you need to reuse an inferior/weak factory case style alternator for the much higher quality and efficient Denso based components. We either do it right or not all. 

This alternator is setup using the exact same internals as our signature GM Billet 400-amp alternators that have led the categories in performance, looks and reliability. Enjoy 200+ amps at idle and over 400 amps at driving rpms from a simple alternator swap.  Add a good battery or battery bank and it will make all the power you need.


Installation info:

*** MAY OR MAY NOT CAUSE CHARGE BATTERY CODE BUT WILL CHARGE PERFECTLY FINE*** We do not reuse the weaker OEM voltage regulator in this application.  We use the same GM style 4pin regulator to get a rock solid 14.6-14.9 volts of output. This does require the customer to use a single 12v key on/off fuse/circuit tap connection (harness included). No different than a car audio amplifier with a "remote turn on wire".   This is also very useful if you are running 14 volt or higher voltage lithium chemistry batteries as you now are able to use our plug and play voltage booster harnesses!  It's a win/win!   Voltage booster harnesses

Due to the idle rpms of these vehicles, we did need to use a 46mm alternator pulley to ensure great charging at idle so this does mean you will need to source a belt that is appx. 1/2" shorter than your oem belt in most cases.  In some applications that may have had idler pulleys replaced by previous owners, non-OEM parts being used over time you may have variations in belt sizes needed.  Always go by the location of your OEM spring tensioner location to verify fitment.  The belt tensioner lines should be the same or as close to the same as the OEM alternator as with the Mechman alternator.  No worries about getting that belt as we have a quick finder link directly on our website. Simply follow the directions and you're good to go!  Quick Belt Finder!

Lastly, to get the most/optimum power out of our alternator we do require adding 0-gauge power and 0-gauge ground wire directly from our alternator to the battery(s) you are wanting to charge. You can leave all OEM wiring in place and just ADD these supplement wires/cables. It's just that simple and just that easy!


NOTES!

Due to varying mid model year changes, vehicle options and retrofits, we equipped this alternator with a 7-rib pulley.  All of these applications will either use a 6-rib or 7-rib belt.  We chose the 7-rib belt for less chance of having fitment issues.  So, if your current alternator uses a 6-rib belt, have no worries when you receive this alternator with a 7-rib pulley.  The extra rib will not be reused and has no side effects or issues in doing so. This is simply a convenience option we chose for customer questions and fitments.

Add to wishlist
Add to compare
Payment Options

Help

If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, withing 24 hours on weekdays.

Customer service

All questions about your order, return and delivery must be sent to our customer service team by e-mail at yourstore@yourdomain.com

Sale & Press

If you are interested in selling our products, need more information about our brand or wish to make a collaboration, please contact us at press@yourdomain.com

The time has come!  Our brand new 100% custom billet alternator for the Audi and VW customers is here.  No longer do you need to reuse an inferior/weak factory case style alternator for the much higher quality and efficient Denso based components. We either do it right or not all. 

This alternator is setup using the exact same internals as our signature GM Billet 400-amp alternators that have led the categories in performance, looks and reliability. Enjoy 200+ amps at idle and over 400 amps at driving rpms from a simple alternator swap.  Add a good battery or battery bank and it will make all the power you need.


Installation info:

*** MAY OR MAY NOT CAUSE CHARGE BATTERY CODE BUT WILL CHARGE PERFECTLY FINE*** We do not reuse the weaker OEM voltage regulator in this application.  We use the same GM style 4pin regulator to get a rock solid 14.6-14.9 volts of output. This does require the customer to use a single 12v key on/off fuse/circuit tap connection (harness included). No different than a car audio amplifier with a "remote turn on wire".   This is also very useful if you are running 14 volt or higher voltage lithium chemistry batteries as you now are able to use our plug and play voltage booster harnesses!  It's a win/win!   Voltage booster harnesses

Due to the idle rpms of these vehicles, we did need to use a 46mm alternator pulley to ensure great charging at idle so this does mean you will need to source a belt that is appx. 1/2" shorter than your oem belt in most cases.  In some applications that may have had idler pulleys replaced by previous owners, non-OEM parts being used over time you may have variations in belt sizes needed.  Always go by the location of your OEM spring tensioner location to verify fitment.  The belt tensioner lines should be the same or as close to the same as the OEM alternator as with the Mechman alternator.  No worries about getting that belt as we have a quick finder link directly on our website. Simply follow the directions and you're good to go!  Quick Belt Finder!

Lastly, to get the most/optimum power out of our alternator we do require adding 0-gauge power and 0-gauge ground wire directly from our alternator to the battery(s) you are wanting to charge. You can leave all OEM wiring in place and just ADD these supplement wires/cables. It's just that simple and just that easy!


NOTES!

Due to varying mid model year changes, vehicle options and retrofits, we equipped this alternator with a 7-rib pulley.  All of these applications will either use a 6-rib or 7-rib belt.  We chose the 7-rib belt for less chance of having fitment issues.  So, if your current alternator uses a 6-rib belt, have no worries when you receive this alternator with a 7-rib pulley.  The extra rib will not be reused and has no side effects or issues in doing so. This is simply a convenience option we chose for customer questions and fitments.

Shipping & Returns

Shipping
We deliver your parcel within 2–3 working days. As soon as your package has left our warehouse, you will receive a confirmation by email. This confirmation contains a tracking number that you can use to find out where your package is.

Returns
We offer free returns within 30 days. All you have to do is fill out the return slip that you received in your package and stick the prepaid label on the package.Please note that it can take 2 weeks for us to process your return. We will do our best to complete this process as soon as possible.

Shipping & Returns

Shipping
We deliver your parcel within 2–3 working days. As soon as your package has left our warehouse, you will receive a confirmation by email. This confirmation contains a tracking number that you can use to find out where your package is.

Returns
We offer free returns within 30 days. All you have to do is fill out the return slip that you received in your package and stick the prepaid label on the package.Please note that it can take 2 weeks for us to process your return. We will do our best to complete this process as soon as possible.

Warranty

We provide a 2-year limited warranty, from the date of purchase for all our products.

If you believe you have received a defective product, or are experiencing any problems with your product, please contact us.

This warranty strictly does not cover damages that arose from negligence, misuse, wear and tear, or not in accordance with product instructions (dropping the product, etc.).

Warranty

We provide a 2-year limited warranty, from the date of purchase for all our products.

If you believe you have received a defective product, or are experiencing any problems with your product, please contact us.

This warranty strictly does not cover damages that arose from negligence, misuse, wear and tear, or not in accordance with product instructions (dropping the product, etc.).

Secure Payment

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

We accept payments with :
Visa, MasterCard, American Express, Paypal, Diners Club, Discover and more.

Secure Payment

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

We accept payments with :
Visa, MasterCard, American Express, Paypal, Diners Club, Discover and more.

Related Products