Death Penalty 18" R7 2500W Subwoofer by Incriminator Audio®

Incriminator AudioCustom Built: Estimated lead time of 10-20 Business days.

SKU: Death Penalty 18 Incriminator Audio 18" R7 2500W Death Penalty Series

In Stock

$569.00 $679.00

Save $110.00

The Death Penalty was designed to be the ultimate ground-pounder subwoofer. Vehicles that are designed to be high powered sub-bass machines (ground-pounders) have requirements that are a bit different than both standard daily driven vehicles and SPL vehicles. They require a subwoofer that can handle extreme amounts of power for long periods of time, both thermally and mechanically, and must be able to do this time and time again.

Three years ago we introduced our Death Penalty with the S.T.A.R. (Six Tier Axis Radical Cooling) motor design with the concept of rapidly cooling the coil by pushing more air with our Air-Driven Cooling, the solution was radical, but the results were remarkable, as the coil last even longer while performing even harder. The 2013 model goal was to engineer the motor with a traditional look, but keep the S.T.A.R. design and we did just that.

The newest version of S.T.A.R. has a traditional top and bottom plate, but adds a seventh magnet wedge for even more motor force over an even larger gap. This has increased the usable X-max of the subwoofer in combination with a longer voice coil assembly. We’ve increased the motor to a 9.25” diameter for extra motor strength, as well as increased motor gap vent cooling with Air-Driven Cooling (ADC) and supplemental rear side vents. The pole vent has a dome shaped top just above the pole to allow air to be pushed out the S.T.A.R. designed side and rear vents on the cones downward stroke. Just under the dome the pole has six machined cooling vents to allow air to be pulled into the gap and the process repeats with the concept of exchanging air as fast as possible, keep fresh cooling air around the coil at all times. The motor is then covered with our custom tooled magnet boot to give the driver a uniform look.

To reduce mechanical fatigue and to maintain linear cone movement throughout the stroke a multiple layer suspension is utilized. The dual lead wires are sewn to the suspension pack in order to both eliminate noises from the lead slapping the cone, and to reduce movement of the leads which can cause them to break. The final touch is our new two-tone red and silver oversize DP skull on the front dustcap.

Available in Dual 1 and Dual 2 standard as well a 12”, 15”, 18” and 21" models.
Options Include:

XS – Extra Spider
PCC – DP Coil Change - Dual 0.35, Dual 0.50, Dual 1.0, Dual 2.0
DC – Direct Connect
DU – Dustcap Laminated Print Upgrade

Features

8 Spoke Black Cast Basket
3" Heavy Gauge 4 Layer Flat Aluminum Voice Coil
Triple Black Progressive Spiders with Dual Woven Tinsel Leads
High Pressure Kraft Fiber Reinforced Cone
Multi-Layer Foam Surround
9.25" 260 Oz Double Magnet Structure with Black Nickel Finish
912 Oz / 62 Pound Motor Structure
Interlocking Aluminum Spider Spacer Assembly
CILD² - Center Interlocking Dustcap
ADC - Air Driven Cooling
S.T.A.R. Motor Design for Built in Motor Cooling
Nickel Plated Push Terminals
Wrap Around Rubber Gasket
2500 Watt RMS Rated
DVC 1 ohm or 2 ohm

Specifications

Driver	12 Inch	15 Inch	18 Inch	21 Inch
FS	N/A	N/A	N/A	N/A
Re	2Ω Series	2Ω Series	2Ω Series	2Ω Series
Qms	N/A	N/A	N/A	N/A
Qes	N/A	N/A	N/A	N/A
Qts	N/A	N/A	N/A	N/A
Mms	N/A	N/A	N/A	N/A
Cms	N/A	N/A	N/A	N/A
Sd	480 cm²	810 cm²	1210 cm²	1620 cm²
Vas	N/A	N/A	N/A	N/A
Spl	N/A	N/A	N/A	N/A
BL	N/A	N/A	N/A	N/A
X-max	N/A	N/A	N/A	N/A
Sub Diameter	12.37"	15.50"	18.50"	21.25"
Mounting	11.12"	14.12"	16.87"	19.25"
Depth	9.39"	10.39"	11.77"	12.39"
Displacement	.21 Cu. Ft.	.22 Cu. Ft.	.24 Cu. Ft.	.25 Cu. Ft.
Power	2500 RMS	2500 RMS	2500 RMS	2500 RMS

{"id":8573278879993,"title":"Death Penalty 18\" R7 2500W Subwoofer by Incriminator Audio®","handle":"death-penalty-18-2000w-subwoofer-by-incriminator-audio","description":"\u003cdiv\u003e \u003cp align=\"justify\"\u003eThe Death Penalty was designed to be the ultimate ground-pounder subwoofer. Vehicles that are designed to be high powered sub-bass machines (ground-pounders) have requirements that are a bit different than both standard daily driven vehicles and SPL vehicles. They require a subwoofer that can handle extreme amounts of power for long periods of time, both thermally and mechanically, and must be able to do this time and time again.\u003c\/p\u003e \u003cp align=\"justify\"\u003eThree years ago we introduced our Death Penalty with the S.T.A.R. (Six Tier Axis Radical Cooling) motor design with the concept of rapidly cooling the coil by pushing more air with our Air-Driven Cooling, the solution was radical, but the results were remarkable, as the coil last even longer while performing even harder. The 2013 model goal was to engineer the motor with a traditional look, but keep the S.T.A.R. design and we did just that.\u003c\/p\u003e \u003cp align=\"justify\"\u003eThe newest version of S.T.A.R. has a traditional top and bottom plate, but adds a seventh magnet wedge for even more motor force over an even larger gap. This has increased the usable X-max of the subwoofer in combination with a longer voice coil assembly. We’ve increased the motor to a 9.25” diameter for extra motor strength, as well as increased motor gap vent cooling with Air-Driven Cooling (ADC) and supplemental rear side vents. The pole vent has a dome shaped top just above the pole to allow air to be pushed out the S.T.A.R. designed side and rear vents on the cones downward stroke. Just under the dome the pole has six machined cooling vents to allow air to be pulled into the gap and the process repeats with the concept of exchanging air as fast as possible, keep fresh cooling air around the coil at all times. The motor is then covered with our custom tooled magnet boot to give the driver a uniform look.\u003c\/p\u003e \u003cp align=\"justify\"\u003eTo reduce mechanical fatigue and to maintain linear cone movement throughout the stroke a multiple layer suspension is utilized. The dual lead wires are sewn to the suspension pack in order to both eliminate noises from the lead slapping the cone, and to reduce movement of the leads which can cause them to break. The final touch is our new two-tone red and silver oversize DP skull on the front dustcap.\u003c\/p\u003e Available in Dual 1 and Dual 2 standard as well a 12”, 15”, 18” and 21\" models.\u003cbr\u003e Options Include:\u003cbr\u003e \u003cul\u003e \u003cli\u003eXS – Extra Spider\u003c\/li\u003e \u003cli\u003ePCC – DP Coil Change - Dual 0.35, Dual 0.50, Dual 1.0, Dual 2.0\u003c\/li\u003e \u003cli\u003eDC – Direct Connect\u003c\/li\u003e \u003cli\u003eDU – Dustcap Laminated Print Upgrade\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003cdiv\u003e \u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e8 Spoke Black Cast Basket\u003c\/li\u003e \u003cli\u003e3\" Heavy Gauge 4 Layer Flat Aluminum Voice Coil\u003c\/li\u003e \u003cli\u003eTriple Black Progressive Spiders with Dual Woven Tinsel Leads\u003c\/li\u003e \u003cli\u003eHigh Pressure Kraft Fiber Reinforced Cone\u003c\/li\u003e \u003cli\u003eMulti-Layer Foam Surround\u003c\/li\u003e \u003cli\u003e9.25\" 260 Oz Double Magnet Structure with Black Nickel Finish\u003c\/li\u003e \u003cli\u003e912 Oz \/ 62 Pound Motor Structure\u003c\/li\u003e \u003cli\u003eInterlocking Aluminum Spider Spacer Assembly\u003c\/li\u003e \u003cli\u003eCILD² - Center Interlocking Dustcap\u003c\/li\u003e \u003cli\u003eADC - Air Driven Cooling\u003c\/li\u003e \u003cli\u003eS.T.A.R. Motor Design for Built in Motor Cooling\u003c\/li\u003e \u003cli\u003eNickel Plated Push Terminals\u003c\/li\u003e \u003cli\u003eWrap Around Rubber Gasket\u003c\/li\u003e \u003cli\u003e2500 Watt RMS Rated\u003c\/li\u003e \u003cli\u003eDVC 1 ohm or 2 ohm\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003cdiv\u003e \u003ch3\u003eSpecifications\u003c\/h3\u003e \u003ctable id=\"product_table\" style=\"width: 100%;\" border=\"0\" cellspacing=\"0\" cellpadding=\"2\"\u003e \u003ctbody\u003e \u003ctr\u003e\n\u003cth scope=\"row\" width=\"30%\"\u003e \u003cdiv align=\"left\"\u003eDriver\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003e12 Inch\u003c\/td\u003e \u003ctd\u003e15 Inch\u003c\/td\u003e \u003ctd\u003e18 Inch\u003c\/td\u003e \u003ctd\u003e21 Inch\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003eFS\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003eRe\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003e2Ω Series\u003c\/td\u003e \u003ctd\u003e2Ω Series\u003c\/td\u003e \u003ctd\u003e2Ω Series\u003c\/td\u003e \u003ctd\u003e2Ω Series\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003eQms\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003eQes\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003eQts\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003eMms\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003eCms\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003eSd\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003e480 cm²\u003c\/td\u003e \u003ctd\u003e810 cm²\u003c\/td\u003e \u003ctd\u003e1210 cm²\u003c\/td\u003e \u003ctd\u003e1620 cm²\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003eVas\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003eSpl\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003eBL\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003eX-max\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003eSub Diameter\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003e12.37\"\u003c\/td\u003e \u003ctd\u003e15.50\"\u003c\/td\u003e \u003ctd\u003e18.50\"\u003c\/td\u003e \u003ctd\u003e21.25\"\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003eMounting\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003e11.12\"\u003c\/td\u003e \u003ctd\u003e14.12\"\u003c\/td\u003e \u003ctd\u003e16.87\"\u003c\/td\u003e \u003ctd\u003e19.25\"\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003eDepth\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003e9.39\"\u003c\/td\u003e \u003ctd\u003e10.39\"\u003c\/td\u003e \u003ctd\u003e11.77\"\u003c\/td\u003e \u003ctd\u003e12.39\"\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003eDisplacement\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003e.21 Cu. Ft.\u003c\/td\u003e \u003ctd\u003e.22 Cu. Ft.\u003c\/td\u003e \u003ctd\u003e.24 Cu. Ft.\u003c\/td\u003e \u003ctd\u003e.25 Cu. Ft.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003ePower\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003e2500 RMS\u003c\/td\u003e \u003ctd\u003e2500 RMS\u003c\/td\u003e \u003ctd\u003e2500 RMS\u003c\/td\u003e \u003ctd\u003e2500 RMS\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003c\/div\u003e","published_at":"2012-05-07T18:09:46-04:00","created_at":"2024-10-23T18:12:33-04:00","vendor":"Incriminator Audio","type":"","tags":["Death Penalty-18 D1 Incriminator Audio 18\" 1500W Dual 1-Ohm Death Penalty Series"],"price":56900,"price_min":56900,"price_max":56900,"available":true,"price_varies":false,"compare_at_price":67900,"compare_at_price_min":67900,"compare_at_price_max":67900,"compare_at_price_varies":false,"variants":[{"id":45619473252601,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"Death Penalty 18 Incriminator Audio 18\" R7 2500W Death Penalty Series","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Death Penalty 18\" R7 2500W Subwoofer by Incriminator Audio®","public_title":null,"options":["Default Title"],"price":56900,"weight":29030,"compare_at_price":67900,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/store.soundsolutionsaudio.com\/cdn\/shop\/files\/DP-12-000__58455.png?v=1729721556","\/\/store.soundsolutionsaudio.com\/cdn\/shop\/files\/DP-12-001__82031.png?v=1729721556","\/\/store.soundsolutionsaudio.com\/cdn\/shop\/files\/DP-12-002__05462.png?v=1729721556","\/\/store.soundsolutionsaudio.com\/cdn\/shop\/files\/DP-12-003__63001.png?v=1729721556","\/\/store.soundsolutionsaudio.com\/cdn\/shop\/files\/DP-12-004__60164.png?v=1729721556","\/\/store.soundsolutionsaudio.com\/cdn\/shop\/files\/DP-12-005__76193.png?v=1729721556","\/\/store.soundsolutionsaudio.com\/cdn\/shop\/files\/DP-12-006__36663.png?v=1729721556"],"featured_image":"\/\/store.soundsolutionsaudio.com\/cdn\/shop\/files\/DP-12-000__58455.png?v=1729721556","options":["Title"],"media":[{"alt":"Death Penalty 12\" R7 2500W Subwoofer by Incriminator Audio® | Condition: New | Category: Incriminator Audio","id":36000677527801,"position":1,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/store.soundsolutionsaudio.com\/cdn\/shop\/files\/DP-12-000__58455.png?v=1729721556"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/store.soundsolutionsaudio.com\/cdn\/shop\/files\/DP-12-000__58455.png?v=1729721556","width":2000},{"alt":"Death Penalty 12\" R7 2500W Subwoofer by Incriminator Audio® | Condition: New | Category: Incriminator Audio","id":36000677593337,"position":2,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/store.soundsolutionsaudio.com\/cdn\/shop\/files\/DP-12-001__82031.png?v=1729721556"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/store.soundsolutionsaudio.com\/cdn\/shop\/files\/DP-12-001__82031.png?v=1729721556","width":2000},{"alt":"Death Penalty 12\" R7 2500W Subwoofer by Incriminator Audio® | Condition: New | Category: Incriminator Audio","id":36000677658873,"position":3,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/store.soundsolutionsaudio.com\/cdn\/shop\/files\/DP-12-002__05462.png?v=1729721556"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/store.soundsolutionsaudio.com\/cdn\/shop\/files\/DP-12-002__05462.png?v=1729721556","width":2000},{"alt":"Death Penalty 12\" R7 2500W Subwoofer by Incriminator Audio® | Condition: New | Category: Incriminator Audio","id":36000677724409,"position":4,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/store.soundsolutionsaudio.com\/cdn\/shop\/files\/DP-12-003__63001.png?v=1729721556"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/store.soundsolutionsaudio.com\/cdn\/shop\/files\/DP-12-003__63001.png?v=1729721556","width":2000},{"alt":"Death Penalty 12\" R7 2500W Subwoofer by Incriminator Audio® | Condition: New | Category: Incriminator Audio","id":36000677757177,"position":5,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/store.soundsolutionsaudio.com\/cdn\/shop\/files\/DP-12-004__60164.png?v=1729721556"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/store.soundsolutionsaudio.com\/cdn\/shop\/files\/DP-12-004__60164.png?v=1729721556","width":2000},{"alt":"Death Penalty 12\" R7 2500W Subwoofer by Incriminator Audio® | Condition: New | Category: Incriminator Audio","id":36000677789945,"position":6,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/store.soundsolutionsaudio.com\/cdn\/shop\/files\/DP-12-005__76193.png?v=1729721556"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/store.soundsolutionsaudio.com\/cdn\/shop\/files\/DP-12-005__76193.png?v=1729721556","width":2000},{"alt":"Death Penalty 12\" R7 2500W Subwoofer by Incriminator Audio® | Condition: New | Category: Incriminator Audio","id":36000677822713,"position":7,"preview_image":{"aspect_ratio":1.0,"height":2000,"width":2000,"src":"\/\/store.soundsolutionsaudio.com\/cdn\/shop\/files\/DP-12-006__36663.png?v=1729721556"},"aspect_ratio":1.0,"height":2000,"media_type":"image","src":"\/\/store.soundsolutionsaudio.com\/cdn\/shop\/files\/DP-12-006__36663.png?v=1729721556","width":2000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e \u003cp align=\"justify\"\u003eThe Death Penalty was designed to be the ultimate ground-pounder subwoofer. Vehicles that are designed to be high powered sub-bass machines (ground-pounders) have requirements that are a bit different than both standard daily driven vehicles and SPL vehicles. They require a subwoofer that can handle extreme amounts of power for long periods of time, both thermally and mechanically, and must be able to do this time and time again.\u003c\/p\u003e \u003cp align=\"justify\"\u003eThree years ago we introduced our Death Penalty with the S.T.A.R. (Six Tier Axis Radical Cooling) motor design with the concept of rapidly cooling the coil by pushing more air with our Air-Driven Cooling, the solution was radical, but the results were remarkable, as the coil last even longer while performing even harder. The 2013 model goal was to engineer the motor with a traditional look, but keep the S.T.A.R. design and we did just that.\u003c\/p\u003e \u003cp align=\"justify\"\u003eThe newest version of S.T.A.R. has a traditional top and bottom plate, but adds a seventh magnet wedge for even more motor force over an even larger gap. This has increased the usable X-max of the subwoofer in combination with a longer voice coil assembly. We’ve increased the motor to a 9.25” diameter for extra motor strength, as well as increased motor gap vent cooling with Air-Driven Cooling (ADC) and supplemental rear side vents. The pole vent has a dome shaped top just above the pole to allow air to be pushed out the S.T.A.R. designed side and rear vents on the cones downward stroke. Just under the dome the pole has six machined cooling vents to allow air to be pulled into the gap and the process repeats with the concept of exchanging air as fast as possible, keep fresh cooling air around the coil at all times. The motor is then covered with our custom tooled magnet boot to give the driver a uniform look.\u003c\/p\u003e \u003cp align=\"justify\"\u003eTo reduce mechanical fatigue and to maintain linear cone movement throughout the stroke a multiple layer suspension is utilized. The dual lead wires are sewn to the suspension pack in order to both eliminate noises from the lead slapping the cone, and to reduce movement of the leads which can cause them to break. The final touch is our new two-tone red and silver oversize DP skull on the front dustcap.\u003c\/p\u003e Available in Dual 1 and Dual 2 standard as well a 12”, 15”, 18” and 21\" models.\u003cbr\u003e Options Include:\u003cbr\u003e \u003cul\u003e \u003cli\u003eXS – Extra Spider\u003c\/li\u003e \u003cli\u003ePCC – DP Coil Change - Dual 0.35, Dual 0.50, Dual 1.0, Dual 2.0\u003c\/li\u003e \u003cli\u003eDC – Direct Connect\u003c\/li\u003e \u003cli\u003eDU – Dustcap Laminated Print Upgrade\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003cdiv\u003e \u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e8 Spoke Black Cast Basket\u003c\/li\u003e \u003cli\u003e3\" Heavy Gauge 4 Layer Flat Aluminum Voice Coil\u003c\/li\u003e \u003cli\u003eTriple Black Progressive Spiders with Dual Woven Tinsel Leads\u003c\/li\u003e \u003cli\u003eHigh Pressure Kraft Fiber Reinforced Cone\u003c\/li\u003e \u003cli\u003eMulti-Layer Foam Surround\u003c\/li\u003e \u003cli\u003e9.25\" 260 Oz Double Magnet Structure with Black Nickel Finish\u003c\/li\u003e \u003cli\u003e912 Oz \/ 62 Pound Motor Structure\u003c\/li\u003e \u003cli\u003eInterlocking Aluminum Spider Spacer Assembly\u003c\/li\u003e \u003cli\u003eCILD² - Center Interlocking Dustcap\u003c\/li\u003e \u003cli\u003eADC - Air Driven Cooling\u003c\/li\u003e \u003cli\u003eS.T.A.R. Motor Design for Built in Motor Cooling\u003c\/li\u003e \u003cli\u003eNickel Plated Push Terminals\u003c\/li\u003e \u003cli\u003eWrap Around Rubber Gasket\u003c\/li\u003e \u003cli\u003e2500 Watt RMS Rated\u003c\/li\u003e \u003cli\u003eDVC 1 ohm or 2 ohm\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003cdiv\u003e \u003ch3\u003eSpecifications\u003c\/h3\u003e \u003ctable id=\"product_table\" style=\"width: 100%;\" border=\"0\" cellspacing=\"0\" cellpadding=\"2\"\u003e \u003ctbody\u003e \u003ctr\u003e\n\u003cth scope=\"row\" width=\"30%\"\u003e \u003cdiv align=\"left\"\u003eDriver\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003e12 Inch\u003c\/td\u003e \u003ctd\u003e15 Inch\u003c\/td\u003e \u003ctd\u003e18 Inch\u003c\/td\u003e \u003ctd\u003e21 Inch\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003eFS\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003eRe\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003e2Ω Series\u003c\/td\u003e \u003ctd\u003e2Ω Series\u003c\/td\u003e \u003ctd\u003e2Ω Series\u003c\/td\u003e \u003ctd\u003e2Ω Series\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003eQms\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003eQes\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003eQts\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003eMms\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003eCms\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003eSd\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003e480 cm²\u003c\/td\u003e \u003ctd\u003e810 cm²\u003c\/td\u003e \u003ctd\u003e1210 cm²\u003c\/td\u003e \u003ctd\u003e1620 cm²\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003eVas\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003eSpl\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003eBL\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003eX-max\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003ctd\u003eN\/A\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003eSub Diameter\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003e12.37\"\u003c\/td\u003e \u003ctd\u003e15.50\"\u003c\/td\u003e \u003ctd\u003e18.50\"\u003c\/td\u003e \u003ctd\u003e21.25\"\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003eMounting\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003e11.12\"\u003c\/td\u003e \u003ctd\u003e14.12\"\u003c\/td\u003e \u003ctd\u003e16.87\"\u003c\/td\u003e \u003ctd\u003e19.25\"\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003eDepth\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003e9.39\"\u003c\/td\u003e \u003ctd\u003e10.39\"\u003c\/td\u003e \u003ctd\u003e11.77\"\u003c\/td\u003e \u003ctd\u003e12.39\"\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003eDisplacement\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003e.21 Cu. Ft.\u003c\/td\u003e \u003ctd\u003e.22 Cu. Ft.\u003c\/td\u003e \u003ctd\u003e.24 Cu. Ft.\u003c\/td\u003e \u003ctd\u003e.25 Cu. Ft.\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e\n\u003cth scope=\"row\"\u003e \u003cdiv align=\"left\"\u003ePower\u003c\/div\u003e \u003c\/th\u003e \u003ctd\u003e2500 RMS\u003c\/td\u003e \u003ctd\u003e2500 RMS\u003c\/td\u003e \u003ctd\u003e2500 RMS\u003c\/td\u003e \u003ctd\u003e2500 RMS\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003c\/div\u003e"}

Add to wishlist

Add to compare

Payment Options

If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, withing 24 hours on weekdays.

Customer service

All questions about your order, return and delivery must be sent to our customer service team by e-mail at yourstore@yourdomain.com

Sale & Press

If you are interested in selling our products, need more information about our brand or wish to make a collaboration, please contact us at press@yourdomain.com

Available in Dual 1 and Dual 2 standard as well a 12”, 15”, 18” and 21" models.
Options Include:

XS – Extra Spider
PCC – DP Coil Change - Dual 0.35, Dual 0.50, Dual 1.0, Dual 2.0
DC – Direct Connect
DU – Dustcap Laminated Print Upgrade

Features

8 Spoke Black Cast Basket
3" Heavy Gauge 4 Layer Flat Aluminum Voice Coil
Triple Black Progressive Spiders with Dual Woven Tinsel Leads
High Pressure Kraft Fiber Reinforced Cone
Multi-Layer Foam Surround
9.25" 260 Oz Double Magnet Structure with Black Nickel Finish
912 Oz / 62 Pound Motor Structure
Interlocking Aluminum Spider Spacer Assembly
CILD² - Center Interlocking Dustcap
ADC - Air Driven Cooling
S.T.A.R. Motor Design for Built in Motor Cooling
Nickel Plated Push Terminals
Wrap Around Rubber Gasket
2500 Watt RMS Rated
DVC 1 ohm or 2 ohm

Specifications

Driver	12 Inch	15 Inch	18 Inch	21 Inch
FS	N/A	N/A	N/A	N/A
Re	2Ω Series	2Ω Series	2Ω Series	2Ω Series
Qms	N/A	N/A	N/A	N/A
Qes	N/A	N/A	N/A	N/A
Qts	N/A	N/A	N/A	N/A
Mms	N/A	N/A	N/A	N/A
Cms	N/A	N/A	N/A	N/A
Sd	480 cm²	810 cm²	1210 cm²	1620 cm²
Vas	N/A	N/A	N/A	N/A
Spl	N/A	N/A	N/A	N/A
BL	N/A	N/A	N/A	N/A
X-max	N/A	N/A	N/A	N/A
Sub Diameter	12.37"	15.50"	18.50"	21.25"
Mounting	11.12"	14.12"	16.87"	19.25"
Depth	9.39"	10.39"	11.77"	12.39"
Displacement	.21 Cu. Ft.	.22 Cu. Ft.	.24 Cu. Ft.	.25 Cu. Ft.
Power	2500 RMS	2500 RMS	2500 RMS	2500 RMS

Shipping
We deliver your parcel within 2–3 working days. As soon as your package has left our warehouse, you will receive a confirmation by email. This confirmation contains a tracking number that you can use to find out where your package is.

Returns
We offer free returns within 30 days. All you have to do is fill out the return slip that you received in your package and stick the prepaid label on the package.Please note that it can take 2 weeks for us to process your return. We will do our best to complete this process as soon as possible.

We provide a 2-year limited warranty, from the date of purchase for all our products.

If you believe you have received a defective product, or are experiencing any problems with your product, please contact us.

This warranty strictly does not cover damages that arose from negligence, misuse, wear and tear, or not in accordance with product instructions (dropping the product, etc.).

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

We accept payments with :
Visa, MasterCard, American Express, Paypal, Diners Club, Discover and more.

Death Penalty 18" R7 2500W Subwoofer by Incriminator Audio®

Features

Specifications

Customer service

Sale & Press

Customer service

Sale & Press

Features

Specifications

Related Products

Support Hotline