Title
Incriminator Audio IX6.4 - 4 Channel Amplifier
Improving on the compact amazingness that was the IA6.4, we bring you the all new IX6.4 that takes it to the next level in every sense. In a space of just 11” long, we were able to wring out 150 watts a channel at 4 ohms, and a whopping 500 watts by 2 channels at 4 ohms. That means, you could power a pair of subwoofers with ease, using the IX6.4 if you wanted to. Don’t forget, the IX6.4 comes with a bass remote for just this purpose.
Not wanting a complex set up to deal with? You could use the IX6.4 as a full system solution with components on the front channels, while powering a strong subwoofer bridged on the rear 2 channels.
Our amps have always been loaded with features. For example, the IX6.4 comes with a mirror feature where you can match everything you set on channels 1&2, mirrored over to channels 3&4. Another great feature is the separate clipping indicators, one for channels 1&2, and another for channels 3&4. A feature on our IX6.4 that is standard to our multi-channel amplifiers is the fully active capable, crossover network.
We set out to build a high end amp that you can be proud to show off or hide under a seat, an amp that will never come up short on power or features, and an amp that you know it will last a long time.
Features:
- Full Range Class D Amplifier
- Dual MOS-FET Pulse Width Modulation Power Supply
- 2 Ohm Stable Stereo / 4 Ohm Mono Topology
- 12 dB/octave - Variable State Subsonic Filter
- 12 dB/octave - Variable State Low / High Pass Filter
- Flexible Crossover Multipliers X1 / X10
- Heavy Duty Copper Layer Double Sided Epoxy PCB
- Mirror Techology (Channel 1/2 to 3/4)
- Individual Clipping Indicators
- Multi-Layer Bullet Proof Protection Circuit
- Wired Remote Control with Clipping Indicator
Specifications:
- Rated Power ( 14.4V at 1% THD )
- RMS Power - 2 Ohm Mono : 500W x 2CH Bridged
- RMS Power - 2 Ohm Stereo : 250W x 4CH
- RMS Power - 4 Ohm Stereo : 150W x 4CH
- Low Pass Filter ( 12dB/Oct. ) : 50Hz - 5000Hz ( X1, X10 )
- High Pass Filter ( 12dB/Oct. ) : 50Hz - 5000Hz ( X1, X10 )
- Subsonic Filter ( 12dB/Oct. ) : 10Hz - 500Hz
- Frequency Response ( +/-1dB ) : 20Hz - 28,000Hz
- Channel Separation : 55dB
- Input Sensitivity ( Volt +/- 5% ) : 6.0V - 0.2V
- Signal / Noise Ratio : 92dB
- Dampening Factor ( 4 Ohm ) : 100 +
- Operation Mode : Mirror CH1/2 > CH3/4
- Power Efficiency ( 4 Ohm ) : 90%
- Fuse Rating ( 14.4V ) : 90A
- Power Input Connection : 4 Gauge
- Operation Voltage : 8.5V - 16.0V
- Speaker Output Connection : 8 Gauge
- Dimensions ( Inches ) : 7.48 W x 2.24 H x 11.02 L
- Dimensions (Millimeters) : 190 W x 57 H x 280 L
Improving on the compact amazingness that was the IA6.4, we bring you the all new IX6.4 that takes it to the next level in every sense. In a space of just 11” long, we were able to wring out 150 watts a channel at 4 ohms, and a whopping 500 watts by 2 channels at 4 ohms. That means, you could power a pair of subwoofers with ease, using the IX6.4 if you wanted to. Don’t forget, the IX6.4 comes with a bass remote for just this purpose.
Not wanting a complex set up to deal with? You could use the IX6.4 as a full system solution with components on the front channels, while powering a strong subwoofer bridged on the rear 2 channels.
Our amps have always been loaded with features. For example, the IX6.4 comes with a mirror feature where you can match everything you set on channels 1&2, mirrored over to channels 3&4. Another great feature is the separate clipping indicators, one for channels 1&2, and another for channels 3&4. A feature on our IX6.4 that is standard to our multi-channel amplifiers is the fully active capable, crossover network.
We set out to build a high end amp that you can be proud to show off or hide under a seat, an amp that will never come up short on power or features, and an amp that you know it will last a long time.
Features:
- Full Range Class D Amplifier
- Dual MOS-FET Pulse Width Modulation Power Supply
- 2 Ohm Stable Stereo / 4 Ohm Mono Topology
- 12 dB/octave - Variable State Subsonic Filter
- 12 dB/octave - Variable State Low / High Pass Filter
- Flexible Crossover Multipliers X1 / X10
- Heavy Duty Copper Layer Double Sided Epoxy PCB
- Mirror Techology (Channel 1/2 to 3/4)
- Individual Clipping Indicators
- Multi-Layer Bullet Proof Protection Circuit
- Wired Remote Control with Clipping Indicator
Specifications:
- Rated Power ( 14.4V at 1% THD )
- RMS Power - 2 Ohm Mono : 500W x 2CH Bridged
- RMS Power - 2 Ohm Stereo : 250W x 4CH
- RMS Power - 4 Ohm Stereo : 150W x 4CH
- Low Pass Filter ( 12dB/Oct. ) : 50Hz - 5000Hz ( X1, X10 )
- High Pass Filter ( 12dB/Oct. ) : 50Hz - 5000Hz ( X1, X10 )
- Subsonic Filter ( 12dB/Oct. ) : 10Hz - 500Hz
- Frequency Response ( +/-1dB ) : 20Hz - 28,000Hz
- Channel Separation : 55dB
- Input Sensitivity ( Volt +/- 5% ) : 6.0V - 0.2V
- Signal / Noise Ratio : 92dB
- Dampening Factor ( 4 Ohm ) : 100 +
- Operation Mode : Mirror CH1/2 > CH3/4
- Power Efficiency ( 4 Ohm ) : 90%
- Fuse Rating ( 14.4V ) : 90A
- Power Input Connection : 4 Gauge
- Operation Voltage : 8.5V - 16.0V
- Speaker Output Connection : 8 Gauge
- Dimensions ( Inches ) : 7.48 W x 2.24 H x 11.02 L
- Dimensions (Millimeters) : 190 W x 57 H x 280 L
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
We accept payments with :
Visa, MasterCard, American Express, Paypal, Diners Club, Discover and more.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
We accept payments with :
Visa, MasterCard, American Express, Paypal, Diners Club, Discover and more.
