Sound Solutions Audio
SSA DM150.2 - 2 Channel Amplifier - 150w x 2 Ch or 500w x 1 Ch
Bulk discount rates
Below are the available bulk discount rates for each individual item when you purchase a certain amount
- Buy 3 - 10 and get 5% off
SSA DM150.2 Amplifier Introducing the all new SSA DM150.2 amplifier. An old school approach, with updated components, for the most discerning of e…
SSA DM150.2 Amplifier
- 150 Watts RMS X 2 @ 4 Ohm
- 500 Watts RMS X 1 @ 4 Ohm
- Angled Terminals for show quality installations
- Full Complimentary low distortion Class AB design
- Tiffany Style RCA connectorsFull Complimentary low distortion Class AB design
- Butterworth Crossover Filters for premium level performance
- An extra pair of input connectors for a direct input that will bypass the crossover so the amp can act as a gain block
- The op amps featured are TI chips w/BB technology high performance audio grade IC's
- Docking Pads® to reduce vibration & extend the life the amplifier
- DC, Short Circuit, Thermal & Overload Protection, on board fusing
- Diagnostic LEDs
Specifications
OUTPUT POWER @ 14.4V input | |
RMS per channel at 4 Ohms | 150 W x 2 CH |
RMS per channel at 2 Ohms | 250 W x 2 CH |
RMS Bridged Mono at 4 Ohms | 500 W x 1 CH |
RMS Mono at 1 Ohm | N/A |
INPUT SENSITIVITY | 200mV - 6.0V |
FREQUENCY RESPONSE | 10Hz - 30KHz +/- 0.5dB |
THD | LESS THAN 0.01% |
S/N RATIO | > 103 dB |
CHANNEL SEPARATION | > 91 dB |
DAMPING FACTOR @100Hz 4 ohm | > 200 |
CROSSOVER RANGE | |
High Pass, 12dB/Octave | 80-1.2K Hz |
Low Pass, 24dB/Octave | 10Hz - 250Hz |
Subsonic | N/A |
Variable Bass Boost (0 to +12 dB bass boost at 45 Hz) | Yes |
Phase Shift (0 - 180 degrees) | No |
Fusing | 3 x 40A |
Size (L x W x H) in | 16.4 x 8.9 x 2.2 |